EPS Springer ATV Armoured Vehicles
ID: 673 | Ref MOD:33060
Units Available for sale: 2
Mileage Hrs/Kms: 100kms
Year of Manufacture:
All prices are based on "per individual unit" purchased, any reductions on advertised price for multiple item orders is subject to negotiation and is conducted at the time of inspection or provision of LOI.
Photo's shown above may represent a vehicle type rather than an actual vehicle,
vehicles are available serviced and painted to customers preference. The specification do not necessarily show the standard version of the machine.
Ask our manager for available options.
SPEC SHEET (Description) EPS Springer ATV Armoured Vehicles
The Springer is an all-terrain vehicle developed for the UK Army by UK-based Enhanced Protection Systems (EPS). The vehicle supports British troops in Afghanistan. The new vehicle fleet was delivered to the army in summer 2009.
The vehicles can be deployed in landing zones to support airborne and light infantry units and used to move combat supplies from helicopter landing sites to forward operating bases (FOB).
The Springer is a two-wheel drive vehicle capable of being driven off-road. Springers were originally intended to be permanently placed at FOB, but the vehicles are capable of delivering supplies to frontline troops.
Spring arm suspension gives the vehicles a high ground clearance of 378mm. The suspension system consists of an adjustable dual coil over springs, gas hydraulic shocks and an air compressor system with load compensators.
The vehicles have a maximum speed of 40mph. The 1.4l engine provides less power, but the vehicles have low centres of gravity and the ability to negotiate tight corners and uneven and muddy terrain.
Tests have proven the capabilities of the vehicle. The Springer is more versatile than the quad and trailer combinations sometimes used to shift loads from helicopter landing sites by the UK Army. It also offers more protection to operators. The vehicle is lightweight and helicopter transportable.
The Springer is based on a current production Tomcar TM5. The base frame is considerably revised and while the original chassis is not strengthened, the overall protective rollcage is.The rear loadbed, which tilts rearwards for automotives access, is modified and can carry up to one tonne including a standard NATO pallet, this loaded by the front-mounted 8,000 lb-rated electric winch and using the two side-mounted sand ladders as a ramp
Specification Springer All-Terrain Vehicle
EPS Springer ATV Armoured Vehicles Cargo systems
The 4 x 2 vehicle can self load a 1t pallet of supplies. Each vehicle is equipped with an 8,000lb self recovery winch and sand ladders, which act as loading ramps for cargo pellet.
EPS Springer ATV Armoured Vehicles Armament
The Springer is fitted with weapons holders to carry light support weapons (LSW). SA80 A2 standard assault rifles are available for two crew members. The SA80 can be fitted with a SUSAT sight and a common weapon sight (CWS). Other weapons include a C7 rifle or a Minimi, a fully automatic light machine gun. The vehicle can also be fitted with a general purpose machine gun (GPMG) mount.
EPS Springer ATV Armoured Vehicles Engine
The Springer is fitted with a 1,400cc naturally aspirated Lombardini diesel engine with the option of turbocharger and petrol variants. The continuously variable transmission (CVT) in combination with a drive chain efficiently utilises engine power.
Three modes are provided on the drive train. The top mode delivers high speed and low torque while lower mode gives more torque and less speed. The middle mode delivers a combination of speed and cross-country capability.
Transmission: Automatic V-Belt CVT, High/Low Gear Box, Rear Wheel Drive, Final drive: oil bathed chains, differetial Lock
Towing Load: 2.7 tonne
Cargo Box: Payload: 1.4 tonne
Tyres: Front AT 25 x 8-12 Rear: AT 26 x 12-12
Suspension: Front: Double Wishbone, Travel: 13.5" (343mm)
Rear: Trail Arm, Travel: 13" (334mm)
Heavy Duty, with adjustable dual coilover springs, gas/hydraulic shocks on board compressor system with load compensators.
Steering: Rack and Pinion. 1.6 Turn Lock to Lock
Brakes: Power Hydraulic Brakes 4 Discs
Fuel: 6.75 Gallon / 27 Litre Safety Tank (2 Tanks)
Electric: 12V 46 AH Battery. Alternator + Regulator 60 AMP, inc 24V Inverter Power Socket, Halogen Head Lights, Tail Lights, Brake Lights, Horn, Rear Fog
Instrumentation: Speedometer, Mileage, Voltometer, Fuel Gauge, Low Oil Pressure Turn Signal, High/Low Beam, Temperature Gauge/DLPAL
Seat: Adjustable, Bucket Type, Head Rest, 4 Point Safety Harness
Dimensions EPS Springer ATV Armoured Vehicles
Length: 135” (3416mm)
Width: 70” (1780mm)
Height: 67” (1686mm)
Wheel Base: 10” (2562mm)
Dry Weight: 1870lbs (850kg)
Cargo Box: Rails: 66.3” x 52.9” (1684mm x 1343mm) 70” (1780mm)
Development EPS Springer
Late 2008 and as the security situation in Afghanistan continued to deteriorate, the UK MoD recognised that it had an emerging requirement for a load carrying vehicle at the lower end of the weight and protection scale. This requirement called for a small and agile vehicle that could rapidly transport stores between helicopter landing/drop zones and Forward Operating Bases (FOBs), and included a payload requirement of around one tonne, that payload possibly palletised, and thereby ruling out anything of conventional ATV configuration.Following competitive trails, in April 2009 the MoD awarded UK-based Enhanced Protection Systems (EPS) a GBP3 million contract for 78 Springer vehicles. The first of these were delivered within four months of contract award, with final deliveries made some six months later.Springer is based on the Israeli-designed, US-built Tomcar all-terrain vehicle which has been available for around 30 years. Reportedly designed as a helicopter transportable light vehicle for the Israeli military, both civil and military versions of the continually evolving design are now widely available. The Tomcar also forms the basis of the G-NIUS Gardium, the first fully autonomous Unmanned Ground Vehicle (UGV) vehicle to be used operationally.As a result of user feedback from British troops in Afghanistan EPS announced the uprated Springer 2 mid-2010, with some proposed Springer 2 revisions (including the wheels/tyres) capable of retro-fit to original production vehicles. Outline details and provisional Specifications of Springer 2 can be found elsewhere in this entry.With the territorial realignment within Helmand Province, Afghanistan and the withdrawal of UK
The Springer is based on a current production Tomcar TM5. The base frame is considerably revised and while the original chassis is not strengthened, the overall protective rollcage is.The rear loadbed, which tilts rearwards for automotives access, is modified and can carry up to one tonne including a standard NATO pallet, this loaded by the front-mounted 8,000 lb-rated electric winch and using the two side-mounted sand ladders as a ramp. The load tray on the front of the vehicle, which tilts forward for maintenance purposes, carries an additional 100 kg of stores, while the rack above the two crew members is used to mount an Electronic Counter Measures (ECM) package.Blast protection was not considered a pressing need for this procurement (insurgents would have limited opportunities to lay mines or similar devices in anticipated areas of operations), or indeed practical for a vehicle that has an unladen weight of less than 1,000 kg. A degree of ballistic protection from the threat of rifle or sniper fire was, and composite material 'doors' that provide a classified level of ballistic protection are fitted.The Lombardini naturally aspirated diesel engine is modified to run on military grade fuel, and in the process is adjusted to deliver a small increase in torque and around 3 hp more. The automatic V-belt CVT two-speed (high/low) transmission and oil-bathed chain-type final drives remain standard.Other modifications carried out here in the UK by EPS include a complete re-wire. The four-wheel hydraulic disc brakes are revised, as are the front
Released from service by the British MOD (Ministry of Defence)
The Rocket site, DN10 6ET, Doncaster, The UK
SIEL Stock (Standard Individual Export Licence) Read more
All prices qoted are GBP U.K. Pounds Sterling Ex. Works excluding VAT where applicable and shipping / associated costs.
Vehicles advertised are subject to remaining unsold.
All prices quoted are based on "per individual unit" purchased, any reductions on advertised price for multiple item orders is subject to negotiation
and is conducted at the time of inspection or provision of LOI.
For complete Terms & Conditions See Main Website. Sale Terms... Click to View Details
We stock parts and accessories for every application: transmissions, repair kits, tyres, engines, undercarriage, belts, oils, filters and so much more!
We have a full stock of spare parts, new and second hand. These parts are always on stock which avoids and delays in ordering.
Exports to any part of the world are possible and our freight department can deal with any shipment of equipment whether its 1 item or 1000 items. We can offer land, sea, or air freight.
Click to View Details
An export licence may be required for items sold to customers outside of the U.K.
For more information on Export Licencing procedures Click to View Details